NTRODUCTION
The SHIFT-LIGHT (Club) from CARTEK is a dashboard mounted device that is designed to indicate to the driver the optimum time to shift up a gear to obtain maximum performance from their engine. The device contains 8 multi-coloured LEDs which form a display sequence that will commence at an engine speed prior to optimum and complete at precisely the optimum speed thereby giving the driver early indication to shift up before the rev limiter is reached or engine damage occurs. The SHIFT-LIGHT (Club) requires an engine speed signal to operate which can be any RPM output from an ECU (5V or 12V square wave), tachometer signal or ignition coil signal. Not suitable for engines with older CDI Ignition systems.
FEATURES
Configure the lower and upper RPM settings with or without the engine running. Engine only needs to be revved to 50% of max RPM if setting up with engine running, or manually input RPM values using Push Button at rear of Shift Light.
Configure day and night brightness of the LEDs
Choose from 6 Shift Light Patterns - either linear or converging.
Also includes an Alarm feature which can be used to alert the driver of an engine issue, such as over-heating or low oil pressure, by making a connection to a compatible sensor, data logging system or dashboard alarm output signal.
Additional RPM filter setting available designed for Historic applications
 
 
SHIFT LIGHT PATTERNS
 
 
 
Specification
Size:
L = 75mm, W = 29mm
Weight:
55g
Operational Voltage:
7v - 18v
Operating Temperature:
-10 -+85 degrees C
Storage temperature:
-40°C - +125°C
Enclosure:
PA 2200 Nylon fully potted. IP64 rated
Cable Length:
70cm
 
CARTEK Shift Light (OBD2)
INTRODUCTIONThis version can be plugged directly into the OBD2 port so no additional wiring is necessary.FEATURESConfigure the lower and upper RPM settings with or without the engine running. Engine only needs to be revved to 50% of max RPM if setting up with engine running, or manually input RPM values using Push Button at rear of Shift Light.Configure day and night brightness of the LED’sChoose from 6 Shift Light Patterns - either linear or converging.Comes with a dedicated 1.5 meter OBD2 Cable.SHIFT LIGHT PATTERNSOBD PROTOCOLSThe Gear Indicator (OBD2) will work on a wide range of cars equipped with an OBD2 Port. To check your car is compatible make sure your OBD port works of one of these OBD2 Protocols:SAE J1850-PWMSAE J1939ISO 9141ISO 14230ISO 15765-4Please note the Shift Light OBD2 is not compatible with OBD splitters and should be the only device plugged into the OBD port. It cannot be hardwired to the vehicle network.SpecificationSize:W = 75mm H =18mm D = 29mmWeight:55gOperational Voltage:7v - 18vOperating Temperature:-10 -+85 degrees CStorage temperature:-40°C - +125°CEnclosure:PA 2200 Nylon fully potted. IP64 ratedMounting:2 x M3 screws under Shift Light or 2 x M3 screws on rear of Shift Light